Mini Touch Dimmer Switch for LED Cabinet Light Strip - Adjustable Brightness - 12/24VDC - Silver (No Power or LED Strip)

About this item

• Support the LED ： Suitable for the PWM monochrome LED Strip Lights like FCOB COB 5630 2835 3528 5630 5730 5050 3014 etc Without IC chip V+ V- Two wires single color LED strip, LED Recessed Lights, LED Chandelier, LED Display, LED Step Lights, LED Wall Lights, LED Spot Lights, RV Dome Lights and so on.
• Work Voltage range ：DC12V-24V, output Max 3A (DC12V3A 36W, DC24V3A 72W), Output Voltage=Input Voltage. IN icon : Power inport. OUT icon : Power Oport. DC plug connector external diameter is 5.5mm, internal diameter is 2.1~2.5mm.
• Easy to Install：Plug play with led strips; Indoor use only. Use come with adhesive tape to fix it to a clean, flat surface. Notes: 1. Please don't stick on the place with metal. 2. Please don't put it on hand to control the LED.
• Touch Turn on/off : Short Touch the controller , can turn on/off the light. The default maximum brightness when turning on the lights is 100%.
• Adjusting brightness: When long pressing any position of the dimming controller, the brightness of the PWM FCOB single color LED strip will change from 10% to 100%. Keeping touch it again, LED strip will going to dim gradually. When dimming, you can stop touching when the needed brightness is reached so that you can get the desired brightness.
• Note: 1. Please do not wire backwards, otherwise the mini dimmer switch controller will overheat and short-circuit. 2. The mini dimmer switch controller voltage depends on PWM FCOB single color LED strip . For example, If use DC12V PWM FCOB single color LED Strip , you should use the DC12V3A 36W power supply to power it.
• Package Content: 1x Mini Touch Dimmer Switch Controller, 1x manual, 1x adhesive tape.